All Equipment Category Specs ↠ Combination Rollers ↠ Hamm HD+ 80i VT-S

Hamm HD+ 80i VT-S Combination Roller

Category: Combination Rollers (See all Combination Rollers for sale)
Manufacturer: Hamm (See all Hamm Equipment for sale)
Model: HD+ 80i VT-S (See all Hamm HD+ 80i VT-S for sale)

Dimensions

Ground Clearance	30 in (75 cm)
Height - Top of Cab	10 ft (3 m)
Overall Length	176 in (448 cm)
Overall Width	6 ft (2 m)
Turning Radius - Inside	14 ft (4 m)
Wheelbase	132 in (334 cm)
Width over tyres	64 in (162 cm)

Drum

Centrifugal Force - High	14,163 lbs (6,424 kg)
Centrifugal Force - Low	14,163 lbs (6,424 kg)
Drum Diameter	45 in (114 cm)
Drum thickness	1 in (2 cm)
Drum Width	66 in (168 cm)
Nominal Amplitude - High	0 in (0 cm)
Nominal Amplitude - Low	0 in (0 cm)
Static Linear Load	131.1 lbs in
Tangential amplitude , rear - 1	0 in (0 cm)
Vibration Frequency 1	42 vpm
Vibration Frequency 2	50 vpm

Engine

Emission Tier Level	EPA Tier 4
Engine Make	DEUTZ
Engine Model	TCD 2.9 L4
Gross Power	74 hp (55 kw)
Net Power	74 hp (55 kw)
Number of Cylinders	4
Power Measured @	2500 rpm

Operating Specifications

Fuel Capacity	32 gal (120 l)
Max Speed	4 mph (7 kph)
Operating Weight	22,046 lbs (10,000 kg)
Operating weight Cabin	16,623 lbs (7,540 kg)
Operating weight ROPS	16,248 lbs (7,370 kg)
Oscillating angle	10 degrees
Water Spray Tank Fluid Capacity	185 gal (700 l)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon