Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Blade Tip Range - Backward | 5 degrees |
Blade Tip Range - Forward | 40 degrees |
Circle Centershift - Left | 27 in (70 cm) |
Circle Centershift - Right | 29 in (73 cm) |
Maximum Blade Position Angle | 90 degrees |
Maximum Depth of Cut | 30 in (75 cm) |
Maximum Lift Above Ground | 18 in (45 cm) |
Maximum Shoulder Reach Outside of Tires - Left | 82 in (209 cm) |
Maximum Shoulder Reach Outside of Tires - Right | 90 in (228 cm) |
Moldboard Sideshift - Left | 20 in (51 cm) |
Moldboard Sideshift - Right | 26 in (66 cm) |
Blade Tip Angle - Front | 40 degrees |
Blade Tip Angle - Rear | 5 degrees |
Diameter | 60 in (153 cm) |
Max Lift Above Ground | 18 in (45 cm) |
Max Reach Outside Tires - Left | 82 in (209 cm) |
Max Reach Outside Tires - Right | 90 in (228 cm) |
Rotation | 360 degrees |
Shift Left | 27 in (70 cm) |
Shift Right | 29 in (73 cm) |
Blade Base | 8 ft (3 m) |
Front Ground Clearance | 2 ft (1 m) |
Height to Top of Isomount Cab | 11 ft (3 m) |
Overall Length | 29 ft (9 m) |
Rear Ground Clearance | 1 ft (0 m) |
Tandem Axle Wheelbase | 5 ft (2 m) |
Wheelbase | 20 ft (6 m) |
Width Over Tires | 9 ft (3 m) |
Base Power (1st Gear) - Net | 213 hp (159 kw) |
Base Power (1st Gear) - Net - Metric | 216 hp (161 kw) |
Base Power (All Gears) - Net | 213 hp (159 kw) |
Bore | 5 in (11 cm) |
Derating Altitude | 10,000 ft (3,048 m) |
Emissions | U.S. Tier 4 Interim/EU Stage IIIB |
Engine Model | Cat C9.3 ACERT |
High - Ambient Capability | 122 degrees |
High Ambient - Fan Speed - Maximum | 1,550 rpm |
High Ambient - Fan Speed - Minimum | 500 rpm |
High Ambient - Fan Speed - Standard | 1,400 rpm |
Maximum Torque | 1,000 lbs ft (1,356 nm) |
Net Torque Gears 7-8 | 1,000 lbs ft (1,356 nm) |
Number of Cylinders | 6 |
Power Measured @ | 2100 rpm |
Speed at Rated Power | 2,100 rpm |
Standard Capability | 109 degrees |
Stroke | 6 in (15 cm) |
Torque Measured @ | 2100 rpm |
VHP Plus - Gear 1F, Net | 213 hp (159 kw) |
VHP Plus - Gear 2F, Net | 223 hp (166 kw) |
VHP Plus - Gear 3F, Net | 233 hp (174 kw) |
VHP Plus - Gear 4F, Net | 243 hp (181 kw) |
VHP Plus - Gear 5F, Net | 248 hp (185 kw) |
VHP Plus - Gear 6F, Net | 253 hp (189 kw) |
VHP Plus - Gear 7F, Net | 258 hp (192 kw) |
VHP Plus - Gear 8F, Net | 263 hp (196 kw) |
VHP Plus Range - Net | 159-196 kW (213-263) |
VHP Plus Range - Net - Metric | 159-196 kW (216-267) |
Circle - Blade Beam Thickness | 2 in (4 cm) |
Circle - Diameter | 60 in (153 cm) |
Drawbar - Height | 6 in (15 cm) |
Drawbar - Thickness | 1 in (1 cm) |
Drawbar - Width | 3 in (8 cm) |
Front Axle - Height to Center | 24 in (60 cm) |
Front Axle - Total Oscillation per Side | 32 degrees |
Front Axle - Wheel Lean - Left/Right | 18 degrees |
Front Frame Structure - Height | 1 ft (0 m) |
Front Frame Structure - Width | 1 ft (0 m) |
Front-Top/Bottom Plate - Thickness | 1 in (2 cm) |
Front-Top/Bottom Plate - Width | 12 in (30 cm) |
Ground Clearance | 2 ft (1 m) |
Oscillation - Total | 32 degrees |
Wheel Lean | 18 degrees |
Circuit Type | Parallel |
Maximum System Pressure | 3503 psi |
Pump Flow | 56 gpm (210 lpm) |
Pump Output | 56 gpm (210 lpm) |
Pump Type | Variable Piston |
Relief Valve Pressure | 3503 psi |
Reservoir Tank Capacity | 16 gal (60 l) |
Standby Pressure | 609 psi |
Arc Radius | 16 in (41 cm) |
Blade Down Pressure | 22,884 lbs (10,380 kg) |
Blade Down Pressure - Base GVW | 17,171 lbs (7,789 kg) |
Blade Down Pressure - Maximum GVW | 29,195 lbs (13,243 kg) |
Blade Pull - Base GVW | 25,908 lbs (11,752 kg) |
Blade Pull - Maximum GVW | 34,072 lbs (15,455 kg) |
Blade Pull at Max Weight | 20,044 lbs (9,092 kg) |
Blade Width | 14 ft (4 m) |
Cutting Edge Thickness | 1 in (2 cm) |
Cutting Edge Width | 6 in (15 cm) |
End Bit - Thickness | 1 in (2 cm) |
End Bit - Width | 6 in (15 cm) |
Max Depth of Cut | 30 in (75 cm) |
Moldboard - Height | 24 in (61 cm) |
Moldboard - Thickness | 1 in (2 cm) |
Moldboard Height | 24 in (61 cm) |
Moldboard Thickness | 1 in (2 cm) |
Moldboard Width | 14 ft (4 m) |
Side Shift Left | 20 in (51 cm) |
Side Shift Right | 26 in (66 cm) |
Throat Clearance | 7 in (17 cm) |
Alternator Supplied Amperage | 150 amps |
Articulation Angle - Left/Right | 20 degrees |
Circle Gearbox Fluid Capacity | 2 gal (7 l) |
Cooling System Fluid Capacity | 15 gal (56 l) |
Forward - 1st | 3 mph (4 kph) |
Forward - 2nd | 4 mph (6 kph) |
Forward - 3rd | 5 mph (8 kph) |
Forward - 4th | 7 mph (11 kph) |
Forward - 5th | 11 mph (17 kph) |
Forward - 6th | 15 mph (24 kph) |
Forward - 7th | 20 mph (33 kph) |
Forward - 8th | 30 mph (47 kph) |
Fuel Capacity | 110 gal (416 l) |
Hydraulic System Fluid Capacity | 26 gal (100 l) |
Max Operation Weight - Front Axle | 13,343 lbs (6,052 kg) |
Max Operation Weight - Rear Axle | 36,444 lbs (16,531 kg) |
Max Operation Weight - Total | 52,795 lbs (23,947 kg) |
Oil System Fluid Capacity | 8 gal (30 l) |
Operating Voltage | 24 volts |
Reverse - 1st | 2 |
Reverse - 2nd | 4 mph (6 kph) |
Reverse - 3rd | 6 mph (9 kph) |
Reverse - 4th | 9 mph (14 kph) |
Reverse - 5th | 16 mph (26 kph) |
Reverse - 6th | 23 mph (37 kph) |
Steering Range - Left/Right | 47.5 degrees |
Tandem Case Fluid Capacity (each) | 17 gal (64 l) |
Top Speed - Forward | 30 mph (47 kph) |
Top Speed - Reverse | 23 mph (37 kph) |
Transmission Fluid Capacity | 17 gal (65 l) |
Turning Radius - Outside Front Tires | 25 ft (8 m) |
Brakes - Parking | Multiple Oil Disc |
Brakes - Secondary | Dual Circuit Control |
Brakes - Service | Multiple Oil Disc |
Brakes - Service - Surface Area | 3,565 cu in (58,420 cu cm) |
Forward/Reverse Gears | 8 Fwd/6 Rev |
Transmission | Direct Drive Powershift |
Machine Length Increase, Beam Raised | 41 in (103 cm) |
Penetration Force | 20,443 lbs (9,273 kg) |
Pry-Out Force | 258,201 lbs (117,118 kg) |
Ripper Shank Holder Spacing | 21 in (53 cm) |
Ripper Shank Holders | 5 |
Ripping Depth - Maximum | 17 in (43 cm) |
Front, V-Type - Scarifier Shank Holder Spacing | 18 in (47 cm) |
Front, V-Type - Scarifying Depth, Maximum | 41 in (103 cm) |
Front, V-Type - Working Width | 47 in (120 cm) |
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing | 5 in (12 cm) |
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum | 18 in (47 cm) |
Front, V-Type, 5 or 11 Tooth - Working Width | 41 in (103 cm) |
Mid, Straight - Scarifier Shank Holder Spacing | 4 in (11 cm) |
Mid, Straight - Scarifier Shank Holders | 17 |
Mid, Straight - Scarifying Depth, Maximum | 13 in (32 cm) |
Mid, Straight - Working Width | 71 in (180 cm) |
Mid, V-Type - Scarifier Shank Holder Spacing | 5 in (12 cm) |
Mid, V-Type - Scarifier Shank Holders | 11 |
Mid, V-Type - Scarifying Depth, Maximum | 12 in (29 cm) |
Mid, V-Type - Working Width | 47 in (118 cm) |
Rear - Scarifier Shank Holder Spacing | 11 in (27 cm) |
Rear - Scarifier Shank Holders | 9 |
Rear - Scarifying Depth, Maximum | 17 in (43 cm) |
Rear - Working Width | 84 in (213 cm) |
Circle Drive Housing | 2 gal (7 l) |
Cooling System | 15 gal (56 l) |
Engine Oil | 8 gal (30 l) |
Front Wheel Spindle Bearing Housing | 0 gal (1 l) |
Fuel Capacity | 110 gal (416 l) |
Hydraulic System - Tank | 17 gal (64 l) |
Hydraulic System - Total | 26 gal (100 l) |
Tandem Housing - Each | 17 gal (64 l) |
Transmission - Differential - Final Drives | 17 gal (65 l) |
Brakes | ISO 3450, ISO 10265 |
ROPS/FOPS | ISO 3471/ISO 3499 |
Sound | ISO 6394; ISO 6395 |
Steering | ISO 5010 |
Articulation Angle | 20 degrees |
Turning Radius | 26 ft (8 m) |
Drive Chain Pitch | 2 in (5 cm) |
Height | 20 in (51 cm) |
Sidewall Thickness - Inner | 1 in (2 cm) |
Sidewall Thickness - Outer | 1 in (2 cm) |
Tandem Oscillation - Front Down | 25 degrees |
Tandem Oscillation - Front Up | 15 degrees |
Wheel Axle Spacing | 60 in (152 cm) |
Width | 8 in (21 cm) |
Max Speed - Forward | 29 mph (47 kph) |
Max Speed - Reverse | 23 mph (37 kph) |
Number of Gears - Forward | 8 |
Number of Gears - Reverse | 6 |
Transmission Type | Direct Drive, Powershift |
Gross Vehicle Weight - Maximum - Front Axle | 17,009 lbs (7,715 kg) |
Gross Vehicle Weight - Maximum - Rear Axle | 37,860 lbs (17,173 kg) |
Gross Vehicle Weight - Maximum - Total | 54,869 lbs (24,888 kg) |