All Equipment Category Specs ↠ Motor Graders ↠ John Deere 870D

John Deere 870D Motor Grader

Category: Motor Graders (See all Motor Graders for sale)
Manufacturer: John Deere (See all John Deere Equipment for sale)
Model: 870D (See all John Deere 870D for sale)

Circle

Blade Tip Angle - Front	42 degrees
Blade Tip Angle - Rear	5 degrees
Diameter	60 in (152 cm)
Max Lift Above Ground	17 in (44 cm)
Max Reach Outside Tires - Left	91 in (232 cm)
Max Reach Outside Tires - Right	91 in (231 cm)
Rotation	360 degrees
Shift Left	31 in (79 cm)
Shift Right	29 in (73 cm)

Dimensions

Blade Base	8 ft (3 m)
Front Ground Clearance	2 ft (1 m)
Height to Top of Isomount Cab	11 ft (3 m)
Overall Length	29 ft (9 m)
Tandem Axle Wheelbase	5 ft (2 m)
Wheelbase	20 ft (6 m)
Width Over Tires	8 ft (3 m)

Engine

Aspiration	Turbocharged with air-to-air aftercooler
Displacement	494 cu in (8,095 cu cm)
Engine Model	6081H
Max Power	235 hp (175 kw)
Net Power Gear 1-2	180 hp (134 kw)
Net Power Gear 4-6	185 hp (138 kw)
Net Power Gear 5-6	200 hp (149 kw)
Net Power Gears 7-8	235 hp (175 kw)
Net Torque Gears 1-2	731 lbs ft (991 nm)
Net Torque Gears 3-4	793 lbs ft (1,075 nm)
Net Torque Gears 5-6	835 lbs ft (1,132 nm)
Net Torque Gears 7-8	913 lbs ft (1,238 nm)
Number of Cylinders	6
Power Measured @	2000 rpm
Torque Measured @	1000 rpm

Front Axle

Ground Clearance	2 ft (1 m)
Oscillation - Total	32 degrees
Wheel Lean	20 degrees

Hydraulic System

Pump Flow	55 gpm (207 lpm)
Pump Type	Variable-displacement piston
Relief Valve Pressure	2750 psi

Moldboard

Blade Pull at Max Weight	29,319 lbs (13,299 kg)
Moldboard Height	27 in (69 cm)
Moldboard Thickness	1 in (3 cm)
Moldboard Width	14 ft (4 m)
Side Shift Left	27 in (68 cm)
Side Shift Right	27 in (68 cm)

Operating Specifications

Alternator Supplied Amperage	100 amps
Circle Gearbox Fluid Capacity	2 gal (6 l)
Cooling System Fluid Capacity	13 gal (49 l)
Fuel Capacity	106 gal (401 l)
Hydraulic System Fluid Capacity	14 gal (53 l)
Max Operation Weight - Front Axle	16,023 lbs (7,268 kg)
Max Operation Weight - Rear Axle	32,576 lbs (14,776 kg)
Max Operation Weight - Total	48,620 lbs (22,054 kg)
Operating Voltage	24 volts
Rear Diff/Final Drive Fluid Capacity	10 gal (36 l)
Std Operation Weight - Front Axle	9,200 lbs (4,173 kg)
Std Operation Weight - Rear Axle	25,550 lbs (11,589 kg)
Std Operation Weight - Total	34,750 lbs (15,762 kg)
Tandem Case Fluid Capacity (each)	20 gal (76 l)
Tire Size	14.00R24 Radial PR
Transmission Fluid Capacity	6 gal (23 l)

Steering System

Articulation Angle	22 degrees
Turning Radius	23 ft (7 m)

Transmission

Max Speed - Forward	26 mph (41 kph)
Max Speed - Reverse	26 mph (41 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	8
Transmission Type	Powershift with direct drive

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon