All Equipment Category Specs ↠ Motor Graders ↠ New Holland G140

New Holland G140 Motor Grader

Category: Motor Graders (See all Motor Graders for sale)
Manufacturer: New Holland (See all New Holland Equipment for sale)
Model: G140 (See all New Holland G140 for sale)

Blades

Maximum Shoulder Reach Outside of Tires - Left	6 in (16 cm)
Maximum Shoulder Reach Outside of Tires - Right	7 in (18 cm)
Moldboard Sideshift - Left	21 in (53 cm)
Moldboard Sideshift - Right	28 in (71 cm)

Circle

Blade Tip Angle - Front	5 degrees
Blade Tip Angle - Rear	42 degrees
Diameter	69 in (176 cm)
Max Lift Above Ground	18 in (45 cm)
Max Reach Outside Tires - Left	78 in (198 cm)
Max Reach Outside Tires - Right	86 in (217 cm)
Rotation	360 degrees

Dimensions

Blade Base	9 ft (3 m)
Front Ground Clearance	1 ft (0 m)
Height to Top of Isomount Cab	10 ft (3 m)
Overall Length	28 ft (9 m)
Rear Ground Clearance	2 ft (1 m)
Tandem Axle Wheelbase	5 ft (2 m)
Wheelbase	21 ft (6 m)
Width Over Tires	8 ft (3 m)

Engine

Aspiration	Turbocharged
Base Power (1st Gear) - Net	140 hp (104 kw)
Displacement	409 cu in (6,701 cu cm)
Engine Model	QSB 6.7L
Max Power	160 hp (119 kw)
Net Power Gears 7-8	160 hp (119 kw)
Net Torque Gears 7-8	550 lbs ft (746 nm)
Number of Cylinders	6
Power Measured @	2200 rpm
Torque Measured @	1500 rpm

Front Axle

Ground Clearance	2 ft (1 m)
Oscillation - Total	19 degrees
Wheel Lean	17.5 degrees

Hydraulic System

Pump Flow	49 gpm (185 lpm)
Pump Type	Piston pump, variable displacement
Relief Valve Pressure	2600 psi

Moldboard

Blade Down Pressure	14,788 lbs (6,708 kg)
Moldboard Height	25 in (62 cm)
Moldboard Length	12 ft (4 m)
Moldboard Thickness	1 in (2 cm)
Moldboard Width	12 ft (4 m)
Side Shift Left	21 in (53 cm)
Side Shift Right	28 in (71 cm)

Operating Specifications

Alternator Supplied Amperage	80 amps
Circle Gearbox Fluid Capacity	1 gal (3 l)
Cooling System Fluid Capacity	11 gal (40 l)
Fuel Capacity	90 gal (341 l)
Hydraulic System Fluid Capacity	48 gal (180 l)
Operating Voltage	24 volts
Operating Weight	29,918 lbs (13,571 kg)
Std Operation Weight - Front Axle	8,172 lbs (3,707 kg)
Std Operation Weight - Rear Axle	21,746 lbs (9,864 kg)
Std Operation Weight - Total	29,918 lbs (13,571 kg)
Tandem Case Fluid Capacity (each)	8 gal (29 l)
Tire Size	14.00X24 10 Ply G2
Transmission Fluid Capacity	5 gal (18 l)

Steering System

Articulation Angle	25 degrees
Turning Radius	23,786 ft (7,250 m)

Transmission

Max Speed - Forward	27 mph (43 kph)
Max Speed - Reverse	18 mph (28 kph)
Number of Gears - Forward	8
Number of Gears - Reverse	4
Transmission Type	Full power shift direct drive

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon